Marine plywood is a strong and versatile plywood type, and it is commonly used for furniture, boats, kitchens, and outdoor projects. Royale Touche Marine Plywood is naturally built for durability and moisture, as it has great water-resistance compared to the average plywood board or wood. To have marine plywood last and look like a million bucks, the best way to go about that is to paint it properly. This guide aims to take you through some quick steps to professionally paint plywood so that it will look good and be protected for years to come!
Prepare the Surface
Step 1 that you will take to prepare, and likely the most important, is preparing your plywood surface. The best way to prepare marine plywood or any wooden surface before painting is to clean it especially well. You will want to take the time to clean thoroughly, removing all dust, mouse droppings, dirt or grease from the marine plywood. Once cleaned if the surface is un-sanded/rough you will want to sand lightly using some fine grit sand paper. Sanding lightly will help smooth the surface of the plywood and prepares the ply for the best adhesion of the paint. Always sand in the direction of the wood’s natural grain to hide as many sanding scratches as possible! And after sanding you will want to wipe the surface with a clean small dry cloth to remove any/all sanding dust.
Seal Edge
Marine plywood is built to resist water on the main side, however the edges of the plywood absorb water at a higher rate. To prevent your edges from swelling, twisting, or cracking as a result of excess moisture and/or water absorption, it is recommended to seal all of the edges with a waterproof sealant or even epoxy resin. Using a small paint brush evenly apply the sealant without gaps. Make sure to let it dry totally before moving on. This extra layer of protection will help keep the plywood durable, and keep water from seeping in along the edges. Royale Touche Marine Plywood is known for its superior edge strength and water protection, making this step even more effective.
Apply Primer
You will need a high-quality primer to create a nice, smooth and even surface to paint. Use a marine-grade compatible primer, along with a primer that is made to work both indoors and outdoors, and your project will only improve! Apply one or two thin coats with a brush or roller. Allow each coat to dry completely before applying the other. This will help the paint adhere better and resist peeling and bubbling over time.
Conclusion
Painting marine plywood is an easy and effective way to enhance both the durability and aesthetic of your marine plywood surfaces. Based on the amount of prep work, sealing, priming, and finishing, your plywood will be able to resist moisture, stay solid, and not only look good, but be good for years. Whether it’s kitchen cabinets, garden furniture, or interior boat spaces, painting a Royale Touche Marine Plywood surface not only makes it functional but adds just the right amount of polish and professionalism to any project.
